How to Fix a Partial Clog Toilet: A Step-by-Step Guide

A partially clogged toilet can be a frustrating issue to deal with. Unlike a full clog, where water doesn’t drain at all, a partial clog allows some water to pass through but often leads to slow drainage or repeated flushing. If you’re facing this problem, don’t worry—this guide will walk you through the steps to resolve it effectively.Understanding a Partial Clog ToiletA partial clog occurs when debris, toilet paper, or other materials obstruct the toilet drain but don’t completely block it. This can cause:

• Slow drainage after flushing
• Water rising higher than usual before draining
• Gurgling sounds from the drain
• The need for multiple flushes to clear waste

Tools You’ll NeedBefore you begin, gather these tools to tackle the partial clog:

1. Plunger (preferably a flange plunger for toilets)
2. Toilet auger (also called a closet auger)
3. Rubber gloves
4. Bucket (optional)
5. Hot water and dish soap (optional)

Step-by-Step Fix for a Partial Clog ToiletStep 1: Assess the SituationStart by flushing the toilet to see how the water drains. If it drains slowly or rises unusually high, you likely have a partial clog. Avoid flushing repeatedly, as this could overflow the bowl.Step 2: Use a PlungerA plunger is often the first line of defense:

1. Place the plunger over the drain hole, ensuring a tight seal.
2. Push down gently, then pull up sharply to create suction.
3. Repeat this motion 10-15 times.
4. Flush to check if the clog is cleared.

If the water drains normally, the clog is resolved. If not, proceed to the next step.Step 3: Try a Toilet AugerFor tougher clogs, a toilet auger can reach deeper into the drain:

1. Insert the auger’s end into the toilet drain.
2. Turn the handle clockwise to extend the cable.
3. When you feel resistance, rotate the auger to break up the clog.
4. Retract the auger and flush to test.

Step 4: Use Hot Water and Dish Soap (Optional)If the clog persists, try this gentle method:

1. Pour a cup of dish soap into the toilet bowl.
2. Add a gallon of hot (not boiling) water.
3. Let it sit for 15-20 minutes.
4. Flush to see if the clog clears.

Step 5: Prevent Future ClogsTo avoid recurring partial clogs:

• Use less toilet paper or flush multiple times for large amounts.
• Avoid flushing non-flushable items like wipes or hygiene products.
• Regularly clean the toilet to prevent buildup.

When to Call a ProfessionalIf none of these steps work, the clog may be deeper in the plumbing system. Contact a plumber if:

• The toilet frequently clogs.
• You notice sewage backups in other drains.
• There’s a foul odor coming from the toilet.

ConclusionA partial clog toilet is a common issue that can usually be resolved with a plunger or auger. By following these steps, you can restore proper drainage and prevent future problems. Remember to act quickly to avoid a full clog or overflow.