Fixing Leaking Faucet Handle: A Step-by-Step Guide to Stop the Drip

A leaking faucet handle is more than just an annoyance; it can lead to water waste and higher utility bills. If you’re dealing with a dripping faucet, don’t worry—fixing it is often simpler than you might think. This guide will walk you through the process of repairing a leaking faucet handle, whether it’s a compression, cartridge, ball, or ceramic disk type.Before you begin, gather the following tools and materials:

• Adjustable wrench
• Screwdriver (flathead and Phillips)
• Replacement washers or O-rings (if needed)
• Plumber’s grease
• Towels or rags
• Bucket or bowl (to catch water)

Step 1: Turn Off the Water SupplyLocate the shut-off valves under the sink and turn them clockwise to stop the water flow. If there are no individual valves, you may need to shut off the main water supply to your home.Step 2: Drain Remaining WaterOpen the faucet to let any remaining water drain out. This will prevent spills when you disassemble the handle.Step 3: Remove the Faucet HandleLook for a small screw (often hidden under a decorative cap) and remove it using a screwdriver. Gently pry off the cap if necessary. Once the screw is removed, lift the handle off the stem.

Step 4: Inspect the ComponentsWith the handle removed, you’ll see the inner workings of the faucet. Check for:

1. Worn-out washers or O-rings
2. Cracked or damaged stems
3. Corroded valve seats

Step 5: Replace Faulty PartsIf you find damaged washers or O-rings, replace them with new ones of the same size. Apply plumber’s grease to the new parts to ensure a smooth seal.Step 6: Reassemble the FaucetCarefully put the handle back in place, ensuring all components align correctly. Tighten the screw and replace any decorative caps.Step 7: Test the FaucetTurn the water supply back on and slowly open the faucet. Check for leaks and ensure the handle operates smoothly.Preventive Tips to Avoid Future Leaks

• Avoid over-tightening the handle, as this can damage washers.
• Clean mineral deposits regularly to prevent corrosion.
• Replace worn parts before they cause leaks.

By following these steps, you can fix a leaking faucet handle and save both water and money. If the problem persists, consider consulting a professional plumber for further assistance.