Maintaining your Ram 2500 Diesel is crucial for its longevity and performance, and one of the most important maintenance tasks is an oil change. Whether you’re a seasoned DIY enthusiast or a first-timer, this guide will walk you through everything you need to know about performing an oil change on your Ram 2500 Diesel.Why is an oil change so important? For diesel engines, oil acts as a lubricant, coolant, and cleaner. Over time, oil breaks down and becomes contaminated with dirt, metal particles, and other debris. Regular oil changes ensure your engine runs smoothly and efficiently.
- Gather the Right Supplies
- High-quality diesel engine oil (check your owner’s manual for the recommended viscosity, typically 15W-40 for the Ram 2500 Diesel)
- Oil filter (OEM or high-quality aftermarket)
- Oil filter wrench
- Drain pan
- Funnel
- Gloves and rags
- Prepare Your Vehicle
- Park on a level surface and engage the parking brake.
- Warm up the engine for a few minutes to help the oil flow more easily.
- Turn off the engine and wait 5-10 minutes to allow the oil to settle.
- Drain the Old Oil
- Locate the oil drain plug underneath the engine.
- Place the drain pan beneath the plug and carefully remove it.
- Allow the oil to drain completely, which may take 10-15 minutes.
- Replace the Oil Filter
- Remove the old oil filter using an oil filter wrench.
- Apply a thin layer of new oil to the gasket of the new filter.
- Install the new filter and tighten it by hand—avoid over-tightening.
- Add New Oil
- Replace the drain plug and tighten it securely.
- Use a funnel to pour the new oil into the engine.
- Check the oil level with the dipstick and add more if needed.
After completing the oil change, start the engine and let it run for a few minutes. Check for leaks around the drain plug and oil filter. Finally, reset the oil change indicator if your Ram 2500 Diesel is equipped with one.How often should you change the oil in your Ram 2500 Diesel? While the manufacturer recommends intervals of 7,500 to 10,000 miles under normal conditions, many diesel experts suggest more frequent changes—every 5,000 miles—especially if you frequently tow heavy loads or drive in extreme conditions.Choosing the right oil is equally important. Look for oils that meet the Cummins CES 20081 specification for the 6.7L Cummins engine. Synthetic oils often provide better protection and longer intervals between changes, though they come at a higher cost.By following these steps and recommendations, you’ll ensure your Ram 2500 Diesel continues to deliver the power and reliability you expect. Regular oil changes are a small investment that pays off in the long run by preventing costly engine repairs and maintaining optimal fuel efficiency.